This roll formed angle iron is shaped from flat 11 gauge steel strip. The legs are solid, with no holes, so you can weld it or drill your own pattern. It is lighter than hot-rolled structural angle of the same size, and it is the type of angle most hardware stores carry.
Sizes and weights
| Profile | Thickness | Weight (lb/ft) | 20′ piece (lb) |
|---|---|---|---|
| 1-1/2″ x 1-1/2″ | 11 ga (0.1196″) | 1.18 | 23.5 |
| 2″ x 2″ | 11 ga (0.1196″) | 1.60 | 32.0 |
Lengths: 1′, 2′, 6′, 10′, 15′, 20′. Finishes: raw steel or pre-galvanized. Weights are catalog shipping weights.
Good uses
- Shelving and storage racks
- Workbench and table frames
- Garage door opener hangers and light bracing
- Edge trim, corner guards and panel framing
Roll formed or structural?
Roll formed angle has a sharp inside corner and an even thickness. Structural angle iron is hot-rolled A36 with a rounded inside corner (fillet) and published strength values. Choose structural for load-bearing work. The types of angle iron guide explains the difference.
Raw or pre-galvanized?
Raw steel is the choice for welding and painting. Pre-galvanized angle is formed from zinc-coated steel, so it looks clean and resists rust indoors and under cover. Cut ends are bare steel and can be touched up with cold-galvanizing paint. More in galvanized angle iron.
Need holes? The same angle is sold as punched angle iron for 1/2″ bolts, or as garage door angle iron for 3/8″ bolts. See all angle iron.
Ordering and shipping
Choose a size, length and finish to see the price, then add it to your cart. Angle ships from Hutchinson, Kansas to addresses in the United States. Orders over 70 lb, which includes most 20′ bundles, ship by freight. You can also choose free local pickup at our Hutchinson plant at checkout. For help with a cut list or a larger order, call (800) 258-1392, Monday to Friday, 8am to 4pm CST.
