This punched structural angle is hot-rolled A36 steel angle with bolt holes already punched. The .563″ (9/16″) holes are on 2″ centers and sized for 1/2″ bolts, so walkways, racks, frames and brackets bolt together without a drill. Order it hot-dip galvanized for outdoor and oilfield work.
If you are searching for angle steel with holes already in it, this is the heavy-duty option: hot-rolled punched angle iron in 1-1/2″ and 2″ legs, 1/8″ thick, with single punch (one leg) or double punch (both legs) and a choice of raw steel or hot-dip galvanized.
Sizes
| Profile | Holes | Weight (lb/ft) | 20′ piece (lb) |
|---|---|---|---|
| 1-1/2″ x 1-1/2″ x 1/8″ | Single punch (one leg) | 1.23 | 24.6 |
| 2″ x 2″ x 1/8″ | Single punch (one leg) | 1.65 | 33.0 |
| 2″ x 2″ x 1/8″ | Double punch (both legs) | 1.65 | 33.0 |
Hole diameter: .563″. Hole spacing: 2″ center to center. Bolt size: 1/2″. Lengths: 1′, 2′, 6′, 10′, 15′, 20′. Finishes: raw steel or hot-dip galvanized.
Single punch or double punch?
Single punch has holes in one leg, so the other leg stays solid for welding or a clean face. Double punch has holes in both legs, so you can bolt in two directions, for example to a stair tread and a stringer at the same time.
Raw or hot-dip galvanized?
Raw steel is for welding, painting or indoor work. Hot-dip galvanized angle carries a zinc coating for rust protection. Choose it for tank batteries, water plants and other outdoor or wet sites. See galvanized angle iron for more.
Works with
- Hex nut and bolt sets sized for our punched holes
- Stair treads, walkway pans and toe boards for catwalks and stairways
- Stanchion lugs for bench and table legs
Prefer a lighter option? Roll-formed punched angle iron uses the same 1/2″ hole pattern. Without holes, choose structural angle iron. See all angle iron.
Questions
What bolt fits this punched angle iron?
A 1/2″ bolt. The holes are .563″ (9/16″) on 2″ centers. Our hex nut and bolt sets are sized to match.
Can I get it without holes?
Yes. Order unpunched structural angle for welding or for drilling your own pattern.
Ordering and shipping
Choose a size, length and finish to see the price, then add it to your cart. Angle ships from Hutchinson, Kansas to addresses in the United States. Orders over 70 lb, which includes most 20′ bundles, ship by freight. You can also choose free local pickup at our Hutchinson plant at checkout. For help with a cut list or a larger order, call (800) 258-1392, Monday to Friday, 8am to 4pm CST.
